Whynter FM65G Manuel d'utilisateur télécharger pdf (Page 7)

1. When the freezer is plugged in to a power outlet, press the “Set” button. The LED

will display the factory pre-set temperature of 0°F

2. To adjust the temperature:

a. Press the “Set” button again

b. While the LED is flashing, press the “▲” or “▼” buttons to reach the

desired temperature

c. Once the desired temperature is set, the LED stops flashing. The current

internal temperature will then be displayed. After the LED has stopped

flashing, you can check the set temperature by pressing the set button

again

d. To change the preset temperature again repeat steps a., b. and c.

Note: Do not use the refrigerator-freezer as a refrigerator when the ambient

temperature is lower than 41°F

Press the “FF” button to run the freezer on the “Fast Freeze” mode. The Fast Freeze

mode rapidly cools the unit to -8°F. The freezer will then maintain this temperature.

Note: Do not run the unit on “FF” (fast freeze) for more than four hours, as this might

adversely affect the refrigeration system.

 Fresh foods should NOT be stored together with frozen foods.

 When the temperature is set below 32°F, do not keep glass-bottled drinks such

as beer and lemonade or soda cans, as the glass and cans might shatter.

Temperature Adjustment

Food Storing

Fast Freeze Mode

1 2 3 4 5 6 7 8 9 10

Pas de commentaire

Whynter FM65G Manuel d'utilisateur Page 7